Operating Limits:
● Temperature:-20℃ - +230℃
● Pressure:≤ 30bar
● Speed: ≤ 25m/s
● Shaft size: 24mm - 250mm
Materials:
● Seal Rings: A,B,Q1/12,Q2/22, U1/12,U2/22
● Elastomer: VITON, EPDM, NBR, FFKM, AFLAS
● Metal Part: SS304, SS316, Duplex, Hastelloy C
Assembly Dwg:
Dimensions (mm):
D | D1 | D3 | D7 | L | L1 | L2 | L3 | L4 |
24 | 20 | 38 | 46 | 63 | 18 | 23 | 40 | 33 |
26 | 22 | 40 | 48 | 63 | 18 | 23 | 40 | 33 |
28 | 24 | 42 | 50 | 63 | 18 | 23 | 40 | 33 |
30 | 25 | 44 | 52 | 63 | 18 | 23 | 40 | 33 |
32 | 26 | 46 | 54 | 63 | 18 | 23 | 40 | 33 |
33 | 28 | 47 | 55 | 63 | 18 | 23 | 40 | 33 |
35 | 30 | 49 | 57 | 63 | 18 | 23 | 40 | 33 |
38 | 33 | 54 | 64 | 67 | 20 | 25 | 42 | 35 |
40 | 35 | 56 | 66 | 67 | 20 | 25 | 42 | 35 |
42 | 36 | 58 | 68 | 67 | 20 | 25 | 42 | 35 |
43 | 38 | 59 | 69 | 68 | 20 | 25 | 43 | 35 |
45 | 40 | 61 | 71 | 68 | 20 | 25 | 43 | 35 |
48 | 43 | 64 | 74 | 68 | 20 | 25 | 43 | 35 |
50 | 45 | 66 | 76 | 69 | 20 | 25 | 44 | 36 |
52 | 46 | 68 | 78 | 69 | 20 | 25 | 44 | 36 |
53 | 48 | 69 | 79 | 69 | 20 | 25 | 44 | 36 |
55 | 50 | 71 | 81 | 69 | 20 | 25 | 44 | 36 |
58 | 53 | 76 | 89 | 74 | 22 | 28 | 46 | 37 |
60 | 55 | 78 | 91 | 74 | 22 | 28 | 46 | 37 |
62 | 56 | 80 | 93 | 74 | 22 | 28 | 46 | 37 |
63 | 58 | 81 | 94 | 74 | 22 | 28 | 46 | 37 |
65 | 60 | 83 | 96 | 74 | 22 | 28 | 46 | 37 |
68 | 63 | 86 | 99 | 76 | 24 | 30 | 46 | 37 |
70 | 65 | 90 | 101 | 76 | 24 | 30 | 46 | 37 |
75 | 70 | 95 | 110 | 76 | 24 | 30 | 46 | 37 |
80 | 75 | 100 | 115 | 77 | 25 | 31 | 46 | 37 |
85 | 80 | 105 | 120 | 77 | 25 | 31 | 46 | 37 |
90 | 85 | 110 | 125 | 80 | 25 | 31 | 49 | 39 |
95 | 90 | 115 | 130 | 80 | 25 | 31 | 49 | 39 |
100 | 95 | 120 | 135 | 80 | 25 | 31 | 49 | 39 |
105 | 100 | 127 | 140 | 80 | 25 | 31 | 49 | 39 |
110 | 105 | 132 | 145 | 80 | 25 | 31 | 49 | 39 |
120 | 110 | 144 | 160 | 103 | 30 | 41 | 62 | 47 |
130 | 120 | 154 | 170 | 103 | 30 | 41 | 62 | 47 |
140 | 130 | 164 | 185 | 103 | 30 | 41 | 62 | 47 |
150 | 140 | 180 | 200 | 113 | 30 | 41 | 72 | 56 |
160 | 150 | 190 | 210 | 113 | 30 | 41 | 72 | 56 |
170 | 160 | 200 | 220 | 113 | 30 | 41 | 72 | 56 |
180 | 170 | 210 | 230 | 116 | 33 | 44 | 72 | 56 |
190 | 180 | 222 | 240 | 122 | 33 | 44 | 78 | 60 |
200 | 190 | 232 | 260 | 124 | 35 | 46 | 78 | 60 |
210 | 200 | 242 | 270 | 124 | 35 | 46 | 78 | 60 |
220 | 210 | 256 | 290 | 129 | 35 | 46 | 83 | 64 |
230 | 220 | 266 | 300 | 131 | 35 | 48 | 83 | 64 |
240 | 230 | 276 | 320 | 131 | 35 | 48 | 83 | 64 |
250 | 240 | 286 | 330 | 133 | 35 | 50 | 83 | 64 |
Related Introduction
Mechanical seals and static seals have been used by human society for a long time, such as the sealing of wine barrels in food manufacturing. However, it was not until the industrial revolution (the end of the 18th century) that the use of steam required steam engines and boiler pressure vessels to achieve rapid development. The development of chemical and petrochemical industries further accelerated the technological progress of static sealing. The current static sealing technology has been able to solve most of the static sealing problems. The pressure ranges from vacuum 300MPa, the temperature ranges from -180 to 1,201, and the diameter to 12m. However, because the influencing factors of static sealing technology are very complicated, theoretical research is difficult, and the experimental cost is high, the important performance index of static sealing, leakage rate, still cannot be quantitatively determined, and the reliability still cannot meet engineering requirements.
Hot Tags: 606b mechanical seal, China, suppliers, manufacturers, factory, customized, buy, quality, pricelist, quotation, low price, made in China, 8B1 Mechanical Seal, 1527 Mechanical Seal, seal mech, ROA Mechanical Seal, PTFE Bellows Mechanical Seals, M7N M74 Mechanical Seal