News - - Page 3

Mar 20, 2022

Advantages Of Metal Bellows Mechanical Seals

The welded bellows in the metal bellows mechanical seals not only has the effect of tension spring, but also has a sealing structure. Therefore, the design does not need a moving ring O-ring, while...

Mar 17, 2022

Several Misunderstandings in The Use Of Mechanical Seals For Pumps

1. The greater the compression of the mechanical seal for pumps , the better the sealing effect: in fact, otherwise, the excessive compression of the spring can lead to sharp wear and instant burni...

Mar 16, 2022

Cause Analysis Of Leakage Of Mechanical Seal For Pumps

Leakage during static test of mechanical seal for pumps installation. After the mechanical seal is installed and debugged, it is generally necessary to conduct static test and observe the leakage. ...

Mar 15, 2022

Inspection Before Installation Of Cartridge Mechanical Seal

The quality of the cartridge mechanical seal 's operation and the length of its life largely depend on the conditions of the equipment itself. Therefore, before installing the cartridge mechani...

Mar 13, 2022

Precautions For The Use Of Equipment Equipped With Mechanical Seals For Pumps

The correct operation and use of mechanical seals for pumps is critical to the impact on life. Generally speaking, the following precautions apply to the correct use of most mechanical seals. Most ...

Mar 11, 2022

Inspection Before Installation Of Mechanical Seal For Pumps

Whether the mechanical seal for pumps is new or repaired, the following items should be carefully checked before installation: Check all the parts, the parts must be clean and free of scale, especi...

Mar 06, 2022

What Causes Mechanical Seals For Pumps To Leak?

At present, under the requirements of production safety and environmental protection of mechanical seals, the use of mechanical seals for pump s has become more extensive, and the industrial and en...

Mar 05, 2022

Several Questions That Need Attention When Mechanical Seals

Mechanical seal surveillance: usually in the sealing surface uniform speed to indicate the sealing surface peripheral. The mechanical seal of the speed above 25 m / s is generally considered to be ...